Jacmar Price List
Click here


SPECIFICATION STANDARDS:
  • POSTS

    - ANGLE POST
    Front flange 1” wide, side flange 1-7/8” wide. Standard heights: 40”, 61”, 73”, 85”, 88”, 97”, 109”, 121”, 145”, and 181”. Greater heights maybe made by splicing. Overall height of spiced posts will be 2” over full foot heights. Non-standard heights available in 1-1/2” increments. Punched for vertical shelf adjustment on 1-1/2” center. Four posts required for each open or closed unit and ledge unit.

    - BEADED POST
    For use in front of units only. Use angle posts at rear. Beaded posts are common between units. Punched for vertical shelf adjustment on 1-1/2” centers. Heights: Same as angle post. Non-standard heights available in 1-1/2” increments. Heavy duty beaded posts projects 7/8” beyond shelf space.

  • SHELF UNITS

    - Height
    85” - Available from stock in 40”, 61”, 73”, 85”, 88”, 97”, 109”, 121”, and more… and custom cut to most any height desired.

    - Widths
    30”, 36”, 42”, 48”.

    - Depths
    12”, 15”, 18”, 24” (30” and 36” are available but not in stock).

  • CLEAR OPENINGS BETWEEN SHELVES

    Front and rear lips of shelf are 1-1/4”, therefore the clear openings is 1-1/4” less than the shelf spacing. EXAMPLE: Shelves spaced on 12” centers have a clear opening of 10-3/4” between shelves.

  • OVERALL WIDTH

    Each unit is 1/4” wider than the listed width. EXAMPLE: Two 36” wide units are 73” overall, plus 1/2” per run.

  • OVERALL DEPTH

    Each unit is 1/16” deeper than the listed depth. EXAMPLE: Two 12” deep units have an overall depth of 24-1/8”.

  • CLEAR OPENING BETWEEN ANGLE POSTS

    1-7/8” less than the nominal width. EXAMPLE: A 36” wide unit is 34-1/8” clear.

  • CLEAR OPENING BETWEEN HEAVY DUTY BEADED POSTS

    1/4” less than the nominal width. EXAMPLE: A 36” unit is 35-3/4” clear. heavy duty beaded posts are 1/2” less than the nominal width.

  • BACKS, ENDS AND SIDES

    Widths conform to the various shelf widths. Heights conform to the various post heights.

  • STANDARD FINISHES

    All shelving components are phosphotized and finished with an electro-coated baked on enamel. Stock color is Jacmar Grey “ASA 49”. Dark Grey also available. Any other color to suit special requirements available at additional cost.

  • SHIPPING

    All items are shipped knocked down. Hardware required is included with all shipments. Installation instructions available, if required.


-Specifications
-Standards
-Shelf Data